24VAC with 3/4″-20 Thread Solenoid
DIG 33-005 two-way normally closed watertight 24 VAC solenoid is specially designed for reliable and long-life operation in any irrigation system. The 24 VAC solenoid has a captive rubber cap with stainless-steel plunger for hassle-free service and may be installed directly onto any valve bonnet with a ¾”-20 thread, to enable a variety of control circuit operations. DIG 24 VAC replacement solenoids excel in low power operation, with low sensitivity to dirt and low sensitivity to voltage variations, to deliver exceptional performance.
Features
- Superb internal design and finish for hassle-free service and operation
- Replaceable plunger tip
- Heavy duty construction
- Advanced materials; unique plastic housing construction
- Excellent performance under pressure
- Weather resistant, completely waterproof IP68, NEMA Type 6D
- Highly durable under corrosive environments
- High mechanical strength
- Reliable operation even with dirty water
- Low sensitivity to voltage variations
- Low power consumption, low coil heating and low sensitivity to residue damage
- Saves wires and installation costs
- Can be used with any brand name AC controller on the market
- Simple to install, operate and maintain
How to Specify
| MODEL | DESCRIPTION |
|---|---|
| 33-005 | 3/4 in. -20 24 VAC thread solenoid |
Specifications
- Solenoid: 24 VAC (50-60 cycles) *Solenoid base connection: 3/4”; 20 UNEF male threaded
- Current (amps):
- Inrush: .25
- Hold: .125 *Power: 1.7 watts *Coil resistance Ohms @ 68° F (32° C): 37.5 *Base flow factor: Kv =.3522 GPM (0.08 m3/h) @ 15 psi (1 bar) Cv=0.09 GPM @1 psi *2 Lead wires: 0.0005” X 3’ length (0.32 mm2 x 80 cm length) *Operating pressure range: Up to 150 psi (0-10 bar) *Max. temperature: water up to 180°F (80°C) *Materials:
- Actuator casing: Nylon
- Seals: NBR
- Wetted parts: Stainless steel and polyamide
- Base: Nylon
